• Installation height required is 2,100 – 3,000mm
    • Maximum width of 2,100 mm and maximum height of 3,000 mm
    • Minimum object height of 1,300 mm
    • Maximum number of sensors which can be combined: 4
    • Configuration layouts for multiple entry or exit doors
    • Manually adjustable counting system (+/- buttons)
    • On/Off button
    • ASSA ABLOY BDE-D FC control unit
    • Compatible with any ASSA ABLOY or third-party door which has built-in radar sensors (radar sensors with a BUS connection must be checked by a professional technician)

    Installation requirements

    • Power supply – 110-230 V AC, 50-60 Hz
    • Indoor and outdoor LEDs (IP65)
    • Time-of-flight 3D sensor technology
    • Maximum distance between sensors: 60 m if you have four sensors; 100 m for three, and 120m for two

Retrofit your current system

We have designed ASSA ABLOY Flow Control to work with most systems, so you can easily retrofit it to your existing set-up. And, with more than 2,000 retrofits to date – make sure you don’t get left behind.

Additional add-ons available

  • LED lighting to help entice passersby

    Clearly visible LED lighting signals whether or not it is okay to enter a building. Green indicates it is safe to go in, while red indicates that maximum occupancy has been reached. At this stage the doorway will only open for people exiting, with normal operations resuming once numbers have fallen.

  • Mounting bracket

    Enjoy more than 99% counting accuracy even if your doorway is significantly wider than it is tall – by adding our mounting bracket to your Flow Control system. The mounting bracket can be placed directly above the doorway or on the ceiling, and does not require professional installation.

  • Loudspeaker

    Easily observe and manage high-traffic and noisy areas with our loudspeaker. As soon as maximum occupancy is reached, an announcement will sound to alert shoppers and staffers alike – switching to “please enter” once it is deemed safe to do so. This solution is available with multiple language settings.

  • Sensors

    If your counting system is placed directly above the main doorway, or if you have a separate entrance and exit, connect an additional sensor to your master control – or run it as a completely independent counting system.

  • Bell system

    In cases where a facility’s automatic doors are not visible from the checkout area, we advise installing a bell to keep staff informed. Once maximum occupancy is reached, ASSA ABLOY Flow Control sends a signal to the bell system, thereby alerting staff. 

  • Read more

Similar products

  • ASSA ABLOY

    ASSA ABLOY T Switch 15

    The ASSA ABLOY T Switch 15 reduce germs easily by making your automatic doors contactless